Q35Y series hydraulic iron worker(one cylinder)
Your position: Home >> Products >> Iron Worker seriesThis kind of machine is the latest Iron Worker in our country, which adopts five-stage hydraulic transmission through repeated beam movement swing. The whole machine is reasonable structured, light, low noise and easy to take.
The tool adopts whole-structure compact designing, setting five-stage. It is an ideal equipment for cutting angle, round, flat bar, punching, joist, as well as notching, channel, equipped with related stop device for cutting
The fixing device can be adjusted by Helical Gear Transmission, simple and convenient..
Technical Data:
MODEL |
Q35Y-8 |
Q35Y-10 |
Q35Y-12 |
PUNCHING |
|||
Rated Capacity |
40T |
45T |
60T |
Tensile strength of sheet metal(N/mm2) |
《450 |
《450 |
《450 |
Max. Capacity(mm) |
20×15 |
22×15 |
28×15 |
Diameter×Thickness(mm) |
38×8 |
38×8 |
38×11 |
Stroke Length(mm) |
32 |
50 |
55 |
Speed-20mm travel(cycles/min) |
23 |
20 |
26 |
Throat Size(standard)(mm) |
175 |
175 |
220 |
Largest Hole(optional) |
57 |
110 |
110 |
Working Height(mm) |
1075 |
940 |
940 |
SHEARING |
|||
Flat Bar-Max. thickness(mm) |
200×13 |
200×15 |
200×20 |
Flat Bar-Max. width(mm) |
350×6 |
300×12 |
300×15 |
Angle Iron Trim(mm) |
80×10 |
80×10 |
80×10 |
Working Height(mm) |
1075 |
940 |
940 |
90°Cut(mm) |
80×8 |
100×10 |
127×12 |
45°Mitre Cut(mm) |
50×6 |
70×6 |
80×8 |
Working Height(mm) |
1210 |
1140 |
1140 |
SECTION CUTTING |
|||
Round/Square Bar(mm) |
30/25 |
30/30 |
40/35 |
Channel/Beam(optional)(mm) |
76×38 |
80×45 |
102×51 |
Tee(optional)(mm) |
38×6 |
40×7 |
76×10 |
Working Height(mm) |
1160 |
1160 |
1160 |
NOTCHING |
|||
Material Thickness(mm) |
-- |
8 |
10 |
Width(mm) |
-- |
35 |
42 |
Depth Vee/Rectangular(mm) |
-- |
60/75 |
60/100 |
Angle Flange(mm) |
-- |
80×10 |
100×10 |
Working Height(mm) |
940 |
940 |
|
TECHINICAL |
|||
Motor |
3KW |
3KW |
4KW |
Net Weight/Gross Weight(Kg) |
570/640 |
1100/1200 |
1300/1450 |
Machine Dimension(cm) |
106×55×148 |
145×59×162 |
152×59×170 |
Packing Dimension(cm) |
122×64×159 |
159×86×182 |
177×86×186 |
OPTIONAL EQUIPMENT |
Q35Y-10 |
Q35Y-10 |
Q35Y-12 |
TUBE NOTCH |
|||
Max. Outside Diameter(mm) |
40 |
60 |
60 |
BENDING |
|||
Bar Bend Max. Capacity(mm) |
80×10 |
100×12 |
150×12 |
Sheet Bend Max. Capacity(mm) |
-- |
-- |
-- |
NOTE:
Based on material strength of 450N/mm2tensile
Design and specification, subject to change without notice。
Return [ Iron Worker series ]