The hydraulic press brake is equipped with three oil cylinders to ensure the better bending effect compared with other peer products. It employs power adjusting devices for the ram stroke and a back gauge with a manual fine adjusting mechanism, besides it has a counter displaying the number. What is more the machine also owns an adjusting device of upper tool wedge clamping on the top of upper tool to ensure the precise of bending. We can also equip it with numerical control according to the customer demand.
Technical Data
Model |
40/2000 |
40/2500 |
63/1600 |
63/2500 |
100/3200 |
Nominal pressure of machine( KN) |
400 |
400 |
630 |
630 |
1000 |
Length of working table(mm) |
2000 |
2500 |
1600 |
2500 |
3200 |
Distance between horsing(mm) |
1640 |
2050 |
1340 |
2050 |
2600 |
Throat depth(mm) |
200 |
200 |
200 |
250 |
320 |
Ram stroke (mm) |
100 |
150 |
100 |
100 |
150 |
Max. open height between working table and ram(mm) |
360 |
360 |
360 |
360 |
410 |
Power of main motor(KW) |
4 |
5.5 |
5.5 |
5.5 |
7.5 |
Overall dimension L×W×H(mm) |
L: 2060
W:1500
H: 2050 |
L:2600
W:1500
H:2050 |
L:1700
W:1500
H:2010 |
L:2600
W:1735
H:2350 |
L:3260
W:1753
H:2500 |
Weight of machine(kg) |
3300 |
3500 |
3000 |
4220 |
8000 |
Model |
100/4000 |
125/3200 |
160/3200 |
160/4000 |
Nominal pressure of machine( KN) |
1000 |
1250 |
1600 |
1600 |
Length of working table(mm) |
4000 |
3200 |
3200 |
4000 |
Distance between horsing(mm) |
3300 |
2600 |
2600 |
3300 |
Throat depth(mm) |
320 |
320 |
320 |
320 |
Ram stokes(mm) |
150 |
150 |
200 |
200 |
Max. open height between working table and ram(mm) |
415 |
415 |
465 |
465 |
Power of main motor(KW) |
7.5 |
7.5 |
11 |
11 |
Overall dimension L×W×H(mm) |
L:4060
W:1340
H:2500 |
L:3280
W:1300
H:2600 |
L:3260
W:1930
H:2800 |
L:4060
W:1930
H:2800 |
Weight of machine(kg) |
10000 |
19000 |
10500 |
14000 |
Model |
200/4000 |
200/6000 |
250/4000 |
320/4000 |
Nominal pressure of machine( KN) |
2000 |
2000 |
2500 |
3200 |
Length of working table(mm) |
4000 |
6000 |
4000 |
4000 |
Distance between horsing(mm) |
3300 |
5100 |
3300 |
3300 |
Throat depth(mm) |
320 |
400 |
320 |
400 |
Ram stokes(mm) |
200 |
200 |
200 |
250 |
Max. open height between working table and ram(mm) |
465 |
465 |
465 |
560 |
Power of main motor(KW) |
15 |
15 |
15 |
22 |
Overall dimension L×W×H(mm) |
L:4060
W:1930
H:2800 |
L:6100
W:1950
H:2900 |
L:4060
W:2340
H:3200 |
L:4060
W:2570
H:3560
|
Weight of machine(kg) |
15000 |
25000 |
21000 |
24500 |
Digital Display Unit forPress Brake
E10D NC
In view of characteristics of press brakes, photoelectric encoder is equipped to displayposition of backgauge and dead block.
Special functions like one side positioning display and spindle allowance offset are available to ensure unity for displayed position and actual position of backgauge.
Integrated with time replay, soft limit switch and power down position memorization function, E10 provides a high cost performance and brings great conveniences to customers.
Main features:
● Two rows of 6 characters , 7 segments LED display
● Position display of backgauge(X-axes) and dead block(Y-axes), resolution in 0.1mm or
0.01mm
● Spindle allowance offset
● Internal time relay
● Inch/mm selection
● Integral factor programmable freely
Digital Display Unit forPress Brake
E20+ CNC
In view of characteristics of press brakes, a variable frequency drive is equipped for backgauge positioning and dead block positioning, with a positioning precision of either 0.01mm or 0.1mm. Up to 50 program steps are available for producing complex workpieces at one time, second adjustment is avoided.
Patented and automatic switch-over between X axes control and Y axes control offers the customer a high cost performance solution provided that work efficiency is ensured and at the same time cost control is considered.Special one side positioning function is provided to remove screw gap. Spindle allowance offset is used to ensure required processing precision.
Automatic retraction is available to avoid possible impact between a workpiece and backgauge.E20+ is providing the customers with more choices by its automatic searching for reference points and power down position memorization.
Main features:
● Two rows of 6 characters , 7 segments LED display
● Positioning control of backgauge(X axes), resolution in 0.1mm
● Spindle allowance offset table
● Internal time relay
● Inch/mm selection
● Integral factor programmable freely
● Stock counter
● Automatic retraction
Digital Display Unit forPress Brake
E200 CNC
Based on the controlling function of E20, E200 press brake controller is specially developed with the most up-to-date electronic technology to control backgauge and dead block of conventional press brakes.
Single key operation for switching-over between different functions, user-friendly operation interfaces and more screen information are available for customers to make programming, parameter setting and automatic processing operations more easily, conveniently and rapidly.
With patented driving control technology of Estun and CAN bus interface for connecting to Estun's own EDC series of AC servo system, performances are fully played.
English/Chinese selection and inch/mm selection are available to meet different requirements of customers from different countries.
The controller has passed the strict EMC testings and has been certified by CE with approval of TUV Rheinland Group in Germany.
Main features:
● Bright LCD display, 240×128
● Multiple working steps programmed at one time and executed automatically,
continuous positioning available
● Automatic retraction to avoid possible impacts between workpiece and backgauge
● One side positioning, screw gap is eliminated
● Inch/mm selection
● Position compensation
● Power down position memorization
● Automatic searching for reference points and power down position memorization are
offered to customer as options |